top of page

Load data for .444 Marlin + .430 | 220gr | Sierra FPJ FN

Recommended Powder(s): Accurate No. 11 FS, Vihtavuori N110

.444 Marlin + .430 | 220gr | Sierra FPJ FN

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.430 | 220gr | Sierra FPJ FN
Manufacturer SKU:
8605
Bullet Weight:
220gr | 14.3g
Bullet Diameter:
0.430" | 10.92mm
Bullet Length:
0.703" | 17.9mm
Caliber:
.444 Marlin load data
Case Length (l3):
2.225" | 56.5mm
Cartridge Length (C.O.L.):
2.531" | 64.3mm
Seated Depth:
0.397" | 10.1mm
Shank Seated Depth:
0.397" | 10.1mm
Case Capacity:
68.0 Grains of Water | 4.42 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
51488 psi | 3550 bar
LID:
LID_B5972_C722
Last updated:
2025-01-01

Load data for 36 loads in caliber .444 Marlin with .430 | 220gr | Sierra FPJ FN bullet and 18 powders such as Accurate No. 11 FS, Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
92%
89%
100%
ADI AR 2207
96%
59%
95%
Accurate 1680
97%
89%
92%
Accurate 5744
89%
89%
96%
Accurate No. 11 FS
89%
88%
99%
Alliant Reloder-7
96%
64%
92%
Hodgdon LilGun
86%
90%
100%
IMR 4227
97%
83%
97%
Lovex D060
91%
88%
96%
Lovex D063
88%
90%
96%
Lovex S040
85%
90%
100%
Lovex S053
96%
76%
99%
ReloadSwiss RS 36
97%
78%
96%
SNPE Vectan BA6 1/2
97%
72%
100%
Shooters World Blackout
88%
90%
96%
Shooters World Buffalo Rifle
91%
88%
96%
Vihtavuori N110
96%
89%
100%
Vihtavuori N120
97%
57%
96%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
33040
64%
**82
98%
[ADI AR 2207]*
<<locked>>
86%
22423
44%
**80
90%
[Accurate 1680]*
<<locked>>
92%
39363
76%
**69
90%
[Accurate 5744]*
<<locked>>
81%
35302
69%
**90
93%
Accurate No. 11 FS
<<locked>>
81%
34548
67%
**83
97%
[Alliant Reloder-7]*
<<locked>>
93%
29704
58%
**21
90%
Hodgdon LilGun
<<locked>>
81%
38740
75%
**34
100%
[IMR 4227]*
<<locked>>
81%
25962
50%
**80
91%
[Lovex D060]*
<<locked>>
81%
33417
65%
**51
92%
[Lovex D063]*
<<locked>>
81%
36042
70%
**00
93%
Lovex S040
<<locked>>
81%
41452
80%
**39
100%
Lovex S053
<<locked>>
81%
24308
47%
**70
95%
[ReloadSwiss RS 36]*
<<locked>>
82%
25193
49%
**06
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
23221
45%
**85
100%
[Shooters World Blackout]*
<<locked>>
81%
36042
70%
**00
93%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
33417
65%
**51
92%
Vihtavuori N110
<<locked>>
81%
29008
56%
**75
100%
[Vihtavuori N120]*
<<locked>>
85%
20436
40%
**82
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page